Page Comparison

You may find that you have an applicant that won't match to a property, or vice versa. There is always a good reason as to why this is happening.

This article explains the steps to work through to resolve a matching issue.

1. Remove match filters

From the property/applicant record, click Match
From the match filter screen, remove each filter tick box, one by one, leaving each box un-ticked after every match attempt

This allows you to see which filter is preventing the records from matching, as you un-tick each one
e.g. first remove Acreage filter then click Accept to run the match
- Check for the required record
- If not shown, return to the match filter screen
- Remove the next filter, and repeat

2. Example

The Acreage filter was removed first, but clicking Accept to run the match did not show the expected applicant in the match result
The Location filter was then removed and Accept clicked to run the match

The expected applicant appeared in the match results
This check then pinpoints that the property/applicant Location is affecting the match

Note

If the match only appears after you have removed all filters, this pinpoints that it is one/more of the following that is affecting the match:

Versions Compared