Page Comparison

...

1. ID check reports

Tip

From version 12.181, ID check reports are created as a report type with enhanced criteria options available

The ability to report on ID was available prior to version 12.181, but it had limited ID check criteria options and ID check criteria was only available as a linked record/sub-report when carrying out a contact report

For more information on adding ID check information, click here: Enter & report on ID

From main menu:

Click Reports then Power Reports and select report type of ID Check
The ID Check Report criteria options will be shown
Where applicable, click Show more to see all available options

ID Check Report criteria options include:

Checked by: allows the report to be filtered by one/more users who carried out the check
This option was available prior to 12.181
ID Expiring: selecting this option filters the report to only show checks that are flagged as expiring
When an ID is classed as ‘expiring’ is dependent on configuration settings - e.g. configuration could dictate that ID is classed as ‘expiring’ when it is 30 days before its actual expiry date
ID Pending: returns ID that has the status of ‘pending’
This option was available prior to 12.181
ID Status: select one/more overall ID status options to report on - options are: Cancelled, Failed, In Progress, Successful, Unchecked
ID Type: select the ID type(s) to report on
This option was available prior to 12.181
ID Valid: selecting this option filters the report to only show checks that are valid - i.e. ID that has not expired and is not cancelled
ID Warning: not shown above - this is an extra status option available with custom configuration for ID, typically when using Lexis Nexis
When enabled, this criteria option allows you to filter the report by warning status
Show only last checks: when selected, will only show the latest ID check for a contact - if not selected, all ID checks will be shown for a contact
Linked Records - allows Contact criteria to be added to the ID check report

Example report

This report will return details of ID checks that were checked by Kian Kettlewell, where the ID is valid and, when a contact has multiple ID check records, only the latest checks will be shown

Tip
Some criteria options available via ID check reporting have no selectable option and will present code instead, as seen for the selected ID Valid criteria option shown above

2. Right to Rent (RTR) check reports

Panel

panelIconId	1f527
panelIcon	:wrench:
panelIconText	🔧
bgColor	#EAE6FF

The option to report on RTR checks is only available when RTR ID check functionality is enabled
For more information on RTR check functionality, click here: Right to Rent (RTR) ID check - configuration option

From main menu:

Click Reports then Power Reports and select report type of ID Check - Right to Rent
The Right to Rent Report criteria options will be shown

Right to Rent (RTR) Report criteria options include:

Checked by: allows the report to be filtered by one/more users who carried out the check
ID 1 Expiry Date: allows the report to be filtered by the expiry date of the Primary ID type entered for the RTR check - options are available to report on expiry dates within a preset range or before/after a specific date
ID 2 Expiry Date: as ID 1 Expiry Date but for the Secondary ID type entered for the RTR check
ID Checked Date: allows the report to be filtered by the RTR ID check date - options are available to report on RTR ID check dates within a preset range or before/after a specific date
ID Expiring: selecting this option filters the report to only show RTR checks that are flagged as expiring
When a RTR check is classed as ‘expiring’ is dependent on configuration settings - e.g. configuration could dictate that the RTR check is classed as ‘expiring’ when it is 30 days before its actual expiry date
ID Expiry Date: allows the report to be filtered by the RTR check overall expiry date - options are available to report on expiry dates within a preset range or before/after a specific date
ID Status: select one/more overall RTR ID check status options to report on - options are: Cancelled, Failed, In Progress, Successful, Unchecked
ID Valid: selecting this option filters the report to only show checks that are valid - i.e. a RTR check that has not expired and is not cancelled
Right to Rent Status: select one/more overall RTR status options to report on - options are: No right to reside, Permanent right to reside, Time limited right to reside
Show only last checks: when selected, will only show the latest RTR check for a contact - if not selected, all RTR checks will be shown for a contact
Linked Records - allows Contact criteria to be added to the Right to Rent report

Example report

This report will return details of Right to Rent checks that have the status of Successful and are close to expiring

Tip
Some criteria options available via Right to Rent ID check reporting have no selectable option and will present code instead, as seen for the selected ID Expiring criteria option shown above

3. Landlord Registration check reports

Panel

panelIconId	1f527
panelIcon	:wrench:
panelIconText	🔧
bgColor	#EAE6FF

The option to report on Landlord Registration is only available when Landlord Registration ID check functionality is enabled
For more information on Landlord Registration functionality, click here: Logging Landlord Registration information (UK only)

From main menu:

Click Reports then Power Reports and select report type of ID Check - Landlord Registration
The Landlord Registration Report criteria options will be shown

Landlord Registration Report criteria options include:

Checked by: allows the report to be filtered by one/more users who carried out the check
ID 1 Expiry Date: allows the report to be filtered by the expiry date of the Primary ID type entered for the Landlord Registration - options are available to report on expiry dates within a preset range or before/after a specific date
ID Checked Date: allows the report to be filtered by the Landlord Registration check date - options are available to report on Landlord Registration check dates within a preset range or before/after a specific date
ID Expiring: selecting this option filters the report to only show Landlord Registration checks that are flagged as expiring
When a Landlord Registration check is classed as ‘expiring’ is dependent on configuration settings - e.g. configuration could dictate that the Landlord Registration check is classed as ‘expiring’ when it is 30 days before its actual expiry date
ID Status: select one/more overall Landlord Registration check status options to report on - options are: Cancelled, Failed, In Progress, Successful, Unchecked
ID Valid: selecting this option filters the report to only show checks that are valid - i.e. a Landlord Registration check that has not expired and is not cancelled
Show only last checks: when selected, will only show the latest Landlord Registration check for a contact - if not selected, all Landlord Registration checks will be shown for a contact
Linked Records - allows Contact criteria to be added to the Right to Rent report

Example report

This report will return details of Landlord Registration checks where the expiry date is after 01/04/2024 and the ID check is valid

Tip
Some criteria options available via Landlord Registration ID check reporting have no selectable option and will present code instead, as seen for the selected ID Valid criteria option shown above

4. Report results grid

After running any of the ID check reports covered in sections 1-3, the ID check report grid is displayed

Double-click any entry in the list to view the contact's ID check screen (and contact record)

Grid functions can be used to sort or filter the list:

To sort the list, click the column heading
To filter the list, click to the right of the column heading to view filter icon and use the search field to filter by content
Columns can be removed from the grid - right-click over the column headings and select Pick columns - columns can also be moved by clicking and dragging them to a new position
After making changes to the grid layout, right-click over the column headings again and click Save grid layout
If you have already saved the report criteria - to save to the default ID check report grid, select Save as default layout or, to save the grid just for this saved report, select Save grid to report

5. Use RTR / Landlord Registration criteria when running a contact report

Right to Rent and Landlord Registration report criteria can be added as a linked record/sub-report within a contact report
This is in addition to being able to add ID Check criteria to a contact report, which was available prior to version 12.181

This enhancement allows a report to be run on contacts dependent on selected RTR/Landlord Registration check information

Contact report with RTR and LR sub-report options.png

Tip
The ability to add an ID check report to an Organiser panel will be available in a future releaseis available in version 12.182, as outlined here: ID, Landlord Registration & Right to Rent check reports can be added to the Organiser

Versions Compared

Old Version 7

New Version 8

Key

Related articles