Sometimes within your Organiser you will notice that your results/stats aren't what you are expecting or they may be different to your colleagues, when in fact you should be seeing the same information. There is usually a very simple reason as to why this is, and it will all be explained below.
The 3 primary areas we need to check are:
- The 'Layout' setup
- The 'Panel' setup
- The report/categeory setup
If you would like to know how to add/remove a category into your panel, please go to the following linkYou may also be interested in: Power Organiser - Adding and Removing Categories
Step-by-step guide / Checks to perform
2. When in the layout setup screen, you will need to ensure that you have the correct 'Layout type' and offices selected.
|
| |||||||||||||||
1. Check your 'Panel' setup. This can be found at the top of every panel in your organiser. Simply hover your mouse above the panel and you will notice a small cog appear - clicks this to enter that panel's setup. 2. When in the panel setup screen, you will need to ensure that you have the correct 'Offices to include' added. These are the offices that your categories will be pulling their data from. | 1.Below is a screenshot of the panel setup location:
| |||||||||||||||
1. Check your 'Report/Category' setup. To access this, simply right click on the category you wish to check/edit and then go to 'Setup' - This will take you to the 'Edit Category' screen.
2. Once in the Edit Category screen, you will need to click on 'Edit' button and then 'Edit criteria' - this will take you to the report setup. 3. Once in the report setup (This is just a Power Report) you will be able to see the current criteria for that category. You can change this to meet your requirements and give you the results that you want. |
|
| Info |
|---|
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | ||
|---|---|---|
| ||
|