Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 38 Next »

This guide has been reviewed against our global client base and classed as relevant to all regions

If you are experiencing performance issues with AgencyCloud, such as it running slowly, freezing or crashing, follow these basic steps to identify the likely cause of the issue you are experiencing

Many issues tend to relate to your local environment (internet fault, increased network in your local office), where this is the case, your local IT support/provider will be required to assist


We are sorry that you are experiencing performance issues with AgencyCloud - is it just your Reapit software that is impacted?

No

  • This issue is most likely to be specific to your office/business
  • Contact your IT Support/provider for assistance

Yes

It is common that only AgencyCloud is impacted, due to it being more sensitive to network performance than other applications - however, this does not always automatically point to an issue/fault with AgencyCloud

1. Check the Reapit Customer Portal & Reapit Service Status page

Check the following:


If issues are being reported on the Reapit Service Status page, please avoid contacting the Reapit Service Desk - Reapit will continue to provide updates centrally 

2. If your issue is intermittent

If you/your office experience intermittent performance at differing points in the day and/or with different areas of AgencyCloud, the issue is most likely to be local to your office/environment

Issues of this nature should always be logged with your IT Support/provider in the first instance


3. If no issues are being reported on the Reapit Service Status page

There are currently no known issues with our hosting partners or recent product releases

  • Complete the Reapit performance checklist, outlined in the troubleshooting guide below 
    This can be done by you or your IT Support/provider

This checklist must be completed in order for Reapit to investigate your issue and provide the necessary support - if you do need to log a case, please provide the following information:

Where in AgencyCloud you are experiencing the issue, when (time of day) and the actions being taken at the time (e.g. searching, adding a property etc)

If there has been a recent upgrade, please highlight this

4. Consult the troubleshooting guide

 Click here for the troubleshooting guide


Nearly all cases of users reporting response times being less than expected, or not the usual standard, relate to their local environment (such as their internet connection or a high volume/workload report) and, as such, the Reapit Service Desk are not able to resolve this, as it is beyond the scope of their service.

However, we can provide the following troubleshooting guidance below to help you rectify your issue. We also recommend the guidelines are followed by an IT competent member of your team.

Troubleshooting guidance

Internet speeds can drop or increase
While this is not uncommon, it is likely that you will notice this more in Reapit AgencyCloud than other desktop application; this is normal and is due to the extensive data processing that Reapit AgencyCloud undertakes

Time of day
Do you note that the issue arises at a particular times of the day? For example, peak times, such as lunchtime, often result in high internet usage which can have an impact on its performance
In this circumstance, you should ask your IT provider to look at the bandwidth capability you have

Speed test
We recommend running an internet speed check using this website: www.speedtest.net 
We suggest the following advised figures you should be looking for:

Download speed: >=2.0 mbps
This impacts how quickly data is refreshed to screen; large documents take longer to download

Upload speed: >=1.0 mbps
This impacts the upload of templates

Having many users in an office with a lower download/upload capability will cause sporadic issues and will depend how many are users are working at the same time


Wireless router connection
If you are using a wireless router connection to access, this could be the issue; faster performance can be assured over a physical network connection
Where possible, try using a fixed (wired) connection to see if that increases performance; if it does, you should refer to your IT provider to review your wireless router setup

Wireless 4G connection
If you have a wireless 4G connection and are experiencing performance issues, try a normal (non 4G) wireless router connection
If the performance improves, then the issue will lie with your internet service provider; they can influence how the traffic is routed over the internet and therefore resolve your issue

Router reset
Resetting your office network router will reset caches that may be impacting optimal traffic routing; this has resulted in correcting performance issues on many occasions
If you are unable to reset your router, contact your IT contact/provider to carry out a reset

Access to specific IP addresses and ports
You should check with your IT provider that there is access to the following IP addresses and ports to ensure that no throttling is being applied
Provide this information to your IT or internet service provider or network team

Read.reapit.net

Write.reapit.net

App.reapit.net

Ports: 43997/443/80


Ensure that all the following checks outlined above are completed before escalating a performance issue to the Reapit Service Desk, in particular:

Speed test

Wireless connection check

Router reset

Ensure that your network provider has reviewed this information and investigated any issues

Still experiencing issues?

The Reapit Service Desk will require information on your PC/machine specification:

Go to your Windows Settings and access Device specifications
(or Control Panel, System and Security, System)

Take down these details or, better still, take a screenshot of your device specifications

Send this to Reapit who will be able to investigate

Still need to log a case ?

Please ensure you let the Reapit Service Desk know the following:

Where in AgencyCloud you are experiencing the issue

What time of day this is happening

Actions being taken at the time (e.g. searching, adding a property etc)

If others are experiencing the issue

If your instance of AgencyCloud has recently been upgraded

  • No labels