Page Comparison

Info
This guide has been reviewed against our global client base and classed as relevant to all regions

From AgencyCloud version 12.151+, two configuration options are available which provide the ability to specify floor level detail within property Attributesattributes

One or both options can be enabled and can display:

...

This is in addition to the existing floor level option already available (from AgencyCloud version 12.138+), as outlined here: Floor level attribute - configuration option

To enable this configuration option, click here to contact Reapit Support

1. Options in property

Attributes

attributes

From a property record, Attributes panel:

Click edit (pencil) icon
At the bottom of the screen one or both options can be made available:
- Property Internal Floors
- Total Building Floors
Exit screen to save changes

Image Modified

2. Floor detail displayed

on Attributes

on attributes panel

From the Attributes panel on the property screen, the floor details are displayed:

Property Internal Floor(s)
Total Building Floor(s)

Image Modified

3. Reporting on floor detail

IS THIS POSSIBLE????????

Reporting on floor detail can be carried out, where configured

From the main menu:

Click Reports and select Power Reports
Change the report type to Property and select Sales or Lettings, as required
The highlighted fields below allows you to report on properties by floor detail

ADD SCREEN

(the criteria labels may differ slightly to those shown below)
Image Added
If your system does not offer

this option

these options, click here to contact Reapit Support to request configuration

Example report
This criteria will return properties in a specific

postcode

area, currently

for sale with your company, between £1.5m - £3m

available to let, with at least

3

2 double bedrooms

, with

and 2 floors

and

, in a building less that

is less than

has 10 floors

high
ADD SCREEN

or less in total
Image Added

Tip

Reports run regularly can be added to an Organiser panel - first, click Save to save the Power Report as a Predefined Report, then go to the Organiser and, from the panel header you wish to add the report to, click Settings (cog) icon and click the New Category link

For more information on how to do this, see this guide Adding and removing categories on the Organiser (step 3b)

Versions Compared

Old Version 1

New Version Current

Key

Related articles