Page Comparison

...

In accordance with the UK Housing Act 2004, every landlord or letting agent that takes a deposit for an assured shorthold tenancy in England & Wales must protect the deposit under an authorised tenancy deposit scheme

Info
The TDS Deposit

...

Management functionality in Reapit provides the following:

Once a deposit is cleared in Reapit, details of tenancies marked as being part of the Deposit Protection Scheme are automatically transferred to the deposit management tool
The tool allows deposits to be registered with the TDS
When registered successfully, the deposit certificate is generated and downloaded to Reapit - where configured, an option to email certificates to landlords/tenants is also available
Updates in Reapit to tenancy start/end dates and/or deposit amount for tenancies with a registered deposit are automatically flagged in the deposit management tool, allowing new certificates to be regenerated and uploaded to Reapit
When a tenancy ends and the deposit returned, this is automatically flagged in the deposit management tool, allowing the deposit to be deregistered

Note
This integration is only applicable when using the TDS Insured Scheme

This guide covers:

Table of Contents

minLevel	2
maxLevel	2

...

TDS provides both insurance-backed & custodial tenancy deposit protection, with free, impartial dispute resolution for when disagreements arise over how the money is divided

Make a deposit ready for registration with TDS via

...

Reapit

For tenancy details to be automatically added to the TDS deposit management tool, the following conditions must be followed to register a deposit in AgencyCloudapplied to the Reapit tenancy record

1. Held by setting on tenancy record

Tip
The Held by setting needs to be set as shown below

From tenancy:

Click Financial & Extensions tab
Held by

should

needs be set to any of the following:
- Us - stakeholder
- Us - landlord’s agent
- Deposit Protection Scheme

Image Modified

2. Deposit paid & cleared

Tip
The deposit must be invoiced, paid & cleared

From tenancy, Accounts panel:

Beside Deposit, click Manage

From tenancy deposit details:

Deposit Paid should be fully paid and marked as (Cleared)
Deposit Protection scheme selected must be named TDS

Image Modified

3. Ensure tenant contact details are correct

Tip
Tenant & landlord contact details must be correct

When the tenant & landlord contact details are passed to the

TDS

deposit management tool, the following information is checked for validity

Postcode

Postcodes
Email addresses
Phone numbers (should be 11 digits)

Image Removed

Tip
When all the above conditions are met, then the deposit will be available to be registered, as outlined in the next section When contact details are not correct, the deposit will be available to be registered, but it will error when processing, therefore it is advisable to ensure they are correct first

Access TDS deposit management

...

tool

From

AgencyCloud

Reapit main menu (on left):

Click Reports
Click Custom Reports and select TDS Bulk Deposit Tool
The TDS Deposit Management screen is displayed

Image Modified

Preview tenancy details

Basic details of the associated tenancy can be accessed from this

Note
If details of a tenancy where a deposit needs registering are not shown in this screen, see previous section for more information on what needs to be completed in Reapit in order for a tenancy to be available for deposit registration

Access tenancy details

To view the associated tenancy of any entry in this screen

Double-click to open the tenancy record

Or, the tenancy details can be previewed from the same screen

Right-click over the required entry and select Preview tenancy

Image Removed

Image Added
Tenancy details are displayed in

another (

a read-only screen
Image Added

Register a deposit

When a tenancy deposit meets the conditions outlined in the section above titledMake a deposit ready for registration with TDS via Reapit, it will be automatically displayed in the TDS Deposit Management screen

1. Select deposit(s) to register

From the TDS Deposit Management screen

Image Removed
Info
See sections below for information on using this screen to register & update deposits, plus how to check the status & download deposit certificates

...

:

Ensure the Register/Update Deposits tab is displayed (top left)
Deposits needing to be registered are shown with the TDS Process status of Register
Tick the boxes to the left of the relevant deposits to be registered

Image Added

Info
This example shows just one deposit registration being processed - however, the tick boxes on the left can be used to process deposits in bulk

2. Process selected deposit(s)

From top right of screen (shown above):

Click Process
Click Yes
Image Added

3. Registration complete

The deposit registration run is processed and confirmed when complete:

A status message is shown bottom left of the screen as each registration is completed
The entry is shown with a green tick to the left

Image Added

Click OK to continue (or View Details to see more information)
Image Added

Tip
When a deposit has been successfully registered, you can now download the certificate, see next section

Download deposit certificate

The steps in this section show how to generate the deposit certificate & download to the Reapit tenant deposit screen

Where configured, this process can also email the certificate to the tenants and/or landlords

1. Select certificate(s) to download

From the TDS Deposit Management screen:

Click Check Status / Download Deposit Certificates tab (top left)
Any tenancy deposits whose certificates have already been sent via the Register/Update Deposits tab (but not downloaded) are displayed with the TDS Process status of Download Certificate
Tick the boxes to the left of the deposits where you wish to download the certificate to the tenant deposit screen

Image Added

Info
This example shows just one certificate download being processed - however, the tick boxes on the left can be used to process these downloads in bulk

2. Process selected deposit certificate(s)

From top right of screen (shown above):

Click Check Status
Click Yes
Image Added

3. Email options (where configured)

An option to email the deposit certificate to all landlords and/or tenants is offered
If your system does not offer the option(s) shown in this section, this can be configured by Reapit Support

Click Yes to generate the relevant emails
Image AddedImage Added

Tip
Emails will be automatically sent to the relevant parties with the TDS deposit registration certificate attached as a PDF file

4. Certificate download complete

When the deposit certificate download is complete:

A status message is shown bottom left of the screen as each certificate is downloaded
Successful downloads are shown with a green tick to the left
Click OK to continue (or View Details to see more information)

Image Added

5. Deposit certificate in tenancy deposit screen

From tenancy, Accounts panel:

Beside Deposit, click Manage

In Deposit Protection panel:

The Provider, Registered Date & Registration No. are automatically completed
Click Store certificate
Image Added
The downloaded certificate is available in the Document Management screen
When a certificate is marked as Private, it will be prevented from upload to a Reapit tracker or MyAgency app that a landlord/tenant can access
Image Added
Double-click the certificate to view it
Can also right-click the certificate for an option to Rename the PDF file
Image Added

Amend a registered deposit

When a deposit has been registered, if the tenancy start/end dates and/or deposit amount is changed - these updates are automatically detected by the TDS deposit management tool
Any other changes will require the deposit to be deregistered & reregistered - for more information, see later section titled Deregister deposit registration when tenancy ends

1. Dealing with updates

When tenancy start/end dates have been updated and/or the deposit amount has changed, these are picked up by the TDS deposit management tool

From the TDS Deposit Management screen:

Ensure the Register/Update Deposits tab is displayed (top left)
The deposit registration is shown with the TDS Process status of Update
Ensure the correct deposit registration entries are ticked

Image Added

Tip
Hover over the entry to see what updates are to be sent to the TDS when processed

2. Process selected deposit(s) for the bulk deposit registration run

From top right of screen (shown above):

Click Process
Click Yes
Image Added
The deposit registration run is processed and confirmed when complete, as seen when initially registering the deposit
Image Added

When the deposit registration update is complete:

A status message is shown bottom left of the screen as each registration is completed
The entry is shown with a green tick to the left
Click OK to continue (or View Details to see more information)

Info
This example shows just one deposit update being processed - however, the tick boxes on the left can be used to process updates (and registrations) in bulk

3. Download updated certificate

From the TDS Deposit Management screen:

Click Check Status / Download Deposit Certificates tab (top left)
Any tenancy deposits whose certificates have already been sent via the Register/Update Deposits tab (but not downloaded) are displayed
Image Added

The same process is used as when originally downloading the certificate, therefore:

Follow instructions outlined in this section: Download deposit certificate
When reaching step 5 to check that the updated certificate has downloaded to AgencyCloud - the updated certificate is shown in the Document Management screen along with the original registration certificate (and any other previously created certificates)
Image Added

Deregister deposit registration when tenancy ends

When a tenancy ends and the deposit refunded, the tenant deposit can be deregistered

1. Finish tenancy & refund deposit on tenancy

From tenancy:

Tenancy Status should be Tenancy Finished
Tenant Deposit Held should show as £0.00

Image Added

2. Select deposit(s) to deregister

From the TDS Deposit Management screen:

Ensure the Register/Update Deposits tab is displayed (top left)
Tick the boxes to the left of the relevant tenant deposits to be deregistered

Image Added

Info
This example shows just one deposit deregistration being processed - however, the tick boxes on the left can be used to process deposit registrations/updates/deregistrations in bulk

3. Process selected deposits to be deregistered

From top right of screen (shown above):

Click Check Status
Click Yes
Image Added
The deposit registration run is processed and confirmed when complete, as seen when initially registering/updating the deposit
Image Added

When the deposit deregistration is complete:

A status message is shown bottom left of the screen as each action is completed
The entry is shown with a green tick to the left
Click OK to continue (or View Details to see more information)

Tip
A journal entry will be created on the tenancy to log that the tenant deposit has been deregistered with the TDS

Registration failure flag/reasons

After processing deposits via the deposit management tool, if the process fails:

A red exclamation mark icon is displayed to the left of the entry
(plus the status message bottom left of the screen will indicate any errors)
Hover over the icon to see what action needs to be taken

Image Added

Versions Compared

Old Version 1

New Version Current

Key

Make a deposit ready for registration with TDS via

Reapit

Access TDS deposit management

tool

Register a deposit

Download deposit certificate

Amend a registered deposit

Deregister deposit registration when tenancy ends

Registration failure flag/reasons

Related articles