Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Current »

This guide has been reviewed against our global client base and classed as relevant to all regions

A configuration option is available which will prevent a supplier being added to a works order when they do not have a specific, valid certificate/accreditation in place

This feature is limited to specific certificate types as set-up in configuration, e.g. public liability

This configuration option needs to be enabled via Reapit Support - click here to request this

1. Adding a supplier to a works order without a required/valid certificate

  • Complete the works order as usual

  • In the Contractor section, when selecting a company record that does not have either:

    • the required certificate/accreditation type
      or

    • a valid required certificate/accreditation

      A message will be displayed

When gathering contractor quotes, contractors are added to the works order without the certificate check

When accepting a contractor quote, the certificate check will then be carried out on the successful contractor

2. Adding/updating supplier certificates

Supplier certificates/accreditations are set up in the supplier company record

From the company record:

  • The Accreditations panel will show any certificate details already added

  • Double-click to update the certificate details or click (plus) to add new

In addition to the above, configuration is also available so that the works order type will determine which certificates are checked

For example, a gas safety accreditation would only be taken into consideration for a works order type of gas safety

  • No labels