Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 28 Next »

This guide has been reviewed against our global client base and classed as relevant to all regions

The Power Organiser is made up of 3 layers:

  • the overall layout

  • panels within the layout

  • categories within the panels

Each layer has its own criteria - this page explains how to change your Organiser layout and also how the layers work together, including which takes precedence

1. Change Organiser layout

When logging in to Reapit and/or the Organiser for the first time, a series of setup screens are displayed which allow you to choose the default layout type (sales/lettings/both) and which office(s) to display data for - if you wish to change these initial settings:

  • Click Settings button (top right of the Organiser screen) for options to change:

    • Default layout type - options are Sales only, Lettings only, Both Sales and Lettings

    • Display data from office(s) - select the office(s) whose data you wish to see within the relevant panels

Organiser - settings - layout settings.png

For information on the initial setup screens, click here: https://reapit.atlassian.net/wiki/spaces/RW/pages/85492134/Changing+the+Organiser+layout+plus+adding+new+panels+categories#Organiser-initial-setup-screens

2. Panels

A new panel can be added to the default layout:

  • Click Layout button and select Add new panel

    Organiser - layout - add new panel.png

  • Different panel type options are shown and outlined, select the required type and click Accept to add the new panel to the layout

    Organiser - layout - add new panel screen.png

  • The new panel is added to the Organiser - depending on your current layout, it may be added to the right of the screen as a button - click this button to view the panel

    New list panel button on right.png

  • The panel is displayed, ready to be configured - the content of the panel and configuration required is dependent on the panel type chosen - the example below is a new List type panel

    New list panel button.png

When a panel has its own office criteria - this criteria takes precedence over the offices selected when choosing the office(s) in the layout options, shown in step 1

3. Organiser panel categories

Most panels need to have categories added to them, this example shows a new List type panel added to the Organiser

  • In Panel header, give the panel a name

  • Click Pick Category to Display - options are:

    • Create new category - allows a new report to be built, or an existing saved report to be used, which is then added to the panel

    • Pick existing category - allows a pre-configured category to be added to the panel

      New list panel - pick categories to display.png

The criteria settings in a category take precedence over the settings in a panel or layout

Organiser initial setup screens

When logging in to Reapit and/or the Organiser for the first time, you will be presented with the following:

  • Click Get Started

  • Choose the most appropriate layout that suits your use of Reapit

  • Choose the office(s) to include in the default layout chosen

These settings can be changed at any time via the Organiser Settings screen (button top right on the Organiser) - as outlined in step 1 at the top of this guide

Need more assistance? No problem! Just log a ticket on the Reapit Service Desk Portal at https://reapitsupport.refined.site/ and a member of our Support Team will be happy to help

  • No labels