Prepare a property for marketing

Sales property

Lettings property

In the brief description field (bottom middle pane):

• Add a short description of the property
  This is normally the summary/initial description used on property portals and brochures

The following settings are dependent on your system configuration:

• Property descriptions may have a text limit

• A strapline field may be in use (above brief description field) to allow an an extra shorter summary description to be added

• The marketing screen may be set up to allow other descriptions to be entered, such as a long description, location & directions - see step 8 for more information

To add/edit property attributes, in the Attributes panel:

• Click the edit (pencil) icon

  

Sales attributes - example

Lettings attributes - example

3a. Update vendor record

• Check details entered are correct

  

• Click Identity Check to enter vendor ID for all vendors
  For more information on ID, click here: Enter & report on ID

  

3b: Price

• Enter the asking price
  Click Asking Price to change the price qualifier, where applicable

  

3c: Commission

• Enter the percentage figure

  If using fixed fees, click the arrow beside the % and Change to fixed amount

  

• If you use a variable commission (or tiered fee) structure, click the menu beside Commission and select Variable Commission

  

  For more information on variable commission, click here: Variable commission / tiered fees - configuration option

3d: Fee detail & agency information

To the right of the price/commission fields:

• Click Financial
  The Financial and Agency Information screen is displayed

  • Ensure post-market appraisal information has been entered
    i.e. Recommended Price, Market Appraisal Price & Vendor Estimate Price and Other Agent Appraisal information (where known)

  • Select the Selling Agency type from the drop-down menu and enter Sub / Joint Agents information at the bottom of the screen

  • Where required, enter an Inter-office Selling Fee and/or click Fee Splits to enter fee split detail
    This can also be done/updated when changing the property to exchanged status

    

4a: Update landlord record

• Click Landlord
  Check details entered are correct
  If there is a joint landlord, in the Joint Landlords panel, click button search for (or add) their details

  

• Click Identity Check (top left) to enter landlord ID
  For more information on ID, click here: Enter & report on ID

  

• In Financial section, click edit icon (pencil) to add/update the landlord financial details
  Bank, accountant & VAT details are held here, along with Non-Resident Landlord information

  

4b: Rent

From property screen:

• Enter the rent

  Click Rent to change rent setting (per week, per 28 days/4 weeks, per month, per annum), where applicable

  

4c: Letting Fee

• Enter the percentage figure

  If not using percentage fees, click the arrow beside the % and select from options to: 
  Change to fixed amount or Set to multiple of weekly or monthly rent

  

4d: Letting service (& fee)

• Select the relevant letting service from the drop-down menu and associated fees, as applicable

  

4e: Fee detail & agency information

In the fees panel:

• Click Rent/Fee Details

• Use the Commission section to enter more detailed fee information can be entered

• Vacant Management details can be entered

• On the right, select the relevant Agency type from the drop-down list
  Sub & Joint Agents can then be added at the bottom of the screen

Images are added at the bottom left corner of the property screen

• Click and drag images over this panel
  Or click the panel to open the Pictures screen (see next step)

  

From property screen:

• Click image or blank panel (as shown above), bottom left of screen
  The Pictures screen is displayed

  

To add images, click Add Picture / Floorplan / Map buttons (top left):

• Enter labels for each image

  • Yellow star indicates the main picture
    Clicking a grey star will switch the main image to that one

  • Icons bottom right of each image allow you to edit or delete the image

  • Click and drag the images to change their position

• Click the Picture link under each image to set what type it is

  

• Once added, the main picture is shown on the property screen
  Use arrow keys (right/left) to scroll through the images

  

From the Attributes panel:

• Click EPC

  

• Enter the Energy Efficiency Rating / Potential and the Environmental Impact Rating / Potential 

• Use the Created field to enter the date the figures were generated
  Enter any other information required (URLs / Document Files)

• Click Make Graph
  A message will be displayed to confirm the graph has been created with the option to view it
  If Yes is clicked, the graph will be shown on screen

  

• The graph can be viewed any time using the View Graph button

From the Attributes panel:

• Click Rooms

  

From the top right panel:

• Select room Name from the drop-down list or type in your own

• Enter Dimensions in metric or imperial
  When hovering over the field, both formats will be shown

• Enter a Description

• Click Picture and select the required picture from the list

• Click Add
  The room detail is added to the main panel of the screen
  To make changes to the room, select it in the main panel, makes changes and click Save 

• Continue using the top right panel to add further room detail

  

When complete…

• Click Make Summary to create a summary of the accommodation details entered, or type own summary in this panel
  The summary is usually used as 'key features' when uploading to property portals

• When the details have been approved, tick Details Approved (top left) and click Save

  

From the top middle panel:

• Click Marketing

  

Sale Board

• Enter Type and Status information
  Depending on configuration, this may trigger an email for sending to your board supplier

Extra Descriptions

What is shown/entered here is dependent on configuration/company requirements

• Enter the required extra descriptions for this property
  Depending on configuration, these descriptions may be used for property descriptions and/or portals

Internet

If you want to stop the property from being uploaded to property portals:

• Tick No Internet Advertising

To generate a what3words location for the property:

• Beside what3words, click Lookup
  The lat/long coordinates for the property are used to generate the what3words location reference
  Click here for more information: Display what3words location on property marketing

If the property is not being uploaded to the internet (when it should be):

• Click Internet Check, a pop-up will be displayed to help pinpoint the issue(s) 

  

From property:

• Click Details

  

• The list of available templates will be displayed
  Templates available and their content are dependent on the requirements of your business

  

• Double-click the required template
  Details will be taken from the property to create a set of details in Word format

• Check over the details produced and make any changes

• From Word, click Save - save options are displayed

  

Step 1: save details as a Word document

From the save options shown above:

• Leave set to Save document in property letters folder and click Accept

• When asked Convert to PDF? click No

• The Save file as screen is displayed - enter a File name and click Save
  This will save a Word version of the details in the property Letters folder - see 9a

  

Step 2: save as PDF particulars

Go back to the Word document:

• Click Save again (in Word document)

• From save options (shown above), select Store as PDF particulars for property and click Accept

• This saves a PDF version in the Details screen in the Predefined Details section
  An option to email the PDF details is available from here, see information below

  

Email details from property details screen

• Click E-mail to select an applicant to send the details to
  This would usually attach the PDF to the email and add brief details too

• An option to log the email in the applicant/property journal is also offered

9a. Word details in property letters folder

After saving a Word version of the details to the property letters folder (outlined in step 9 above):

• From property, click Letters (top right) 

• The Word file is displayed in Existing letters and files (right)

  

Where configured, you may be required to complete a pre-instruction checklist before your property status can be changed to For Sale/To Let - click here for more information on the pre-instruction checklist functionality: Pre-instruction checklist - configuration option

Beside Status (top middle panel):

• Select For Sale / To Let - Won Instruction OR To Let - Won Instruction

• Click Save